Carb floats

Bikes & Bits wanted

Carb floats

Postby H_Lime » Tue Jan 01, 2019 10:16 pm

Howdy pilgrims

And happy 2019 to all you big folks.

Looking for floats for my 88 750. No matter what i do or how i adjust that feckin tab the wet test shows it about 5mm higher than the gasket amd she is running rich. My only suspicion (other than operator stupidity) is a worn float.
There is a lot of play in the pivots.

I might look at changing emulsion tubes too. So if you have decent ones sitting let me know.
User avatar
H_Lime
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 1350
Joined: Thu Dec 09, 2010 12:37 am

Re: Carb floats

Postby BigBob » Tue Jan 01, 2019 11:38 pm

Adjust the floats with the carbs on their side to take the load off them then you should be there or thereabouts
User avatar
BigBob
Admin
Admin
 
Posts: 3652
Joined: Sat Jan 23, 2010 10:46 pm
Location: ESSEX

Re: Carb floats

Postby H_Lime » Wed Jan 02, 2019 10:15 am

Cheers Bob will try that next.
I'm just fookin allergic to rippin carbs out of her y now y to see the same results so with new floats perhaps once set they will be right as no matter what i do they're always the bloody same with these:(
Will probably just buy new ones, csmnl has em for a ton!
User avatar
H_Lime
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 1350
Joined: Thu Dec 09, 2010 12:37 am

Re: Carb floats

Postby spendango » Wed Jan 02, 2019 6:20 pm

I've a couple of sets of old carbs here
User avatar
spendango
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 3039
Joined: Sat Jul 10, 2010 6:54 pm


Return to Wanted

Who is online

Users browsing this forum: No registered users and 1 guest

x