Choke cable holder

Bikes & Bits wanted

Choke cable holder

Postby spendango » Mon Jul 22, 2019 11:08 pm

I can't find what I did with the bracket that holds the choke lever in place at the top yoke , I have a few of the older type that bolt on to the yoke with a 10 mm bolt but mine was the type that is held in place using the yokes pinch bolt , if anyone has a spare I'll buy it
User avatar
spendango
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 3101
Joined: Sat Jul 10, 2010 6:54 pm

Re: Choke cable holder

Postby kyle » Fri Jul 26, 2019 1:31 am

I'll have a look. Is it the bracket the pull knob goes into?

Sent from my HTC Desire 610 using Tapatalk
User avatar
kyle
Should Get Out More!
Should Get Out More!
 
Posts: 594
Joined: Tue May 10, 2011 10:14 pm
Location: glenavy norn iron

Re: Choke cable holder

Postby spendango » Fri Jul 26, 2019 9:21 am

Yep
User avatar
spendango
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 3101
Joined: Sat Jul 10, 2010 6:54 pm

Re: Choke cable holder

Postby BigBob » Fri Jul 26, 2019 11:45 am

Had a look in Bobs box of old Big cables and found these.
The two big ones are off a 43 but I`m sure the other one came off a 42.
You could use the 43 widget if you drilled and tapped a 6mm thread in the front left of your top yoke

SN853793.JPG



SN853794.JPG













You do not have the required permissions to view the files attached to this post.
User avatar
BigBob
Admin
Admin
 
Posts: 3910
Joined: Sat Jan 23, 2010 10:46 pm
Location: ESSEX

Re: Choke cable holder

Postby H_Lime » Fri Jul 26, 2019 10:39 pm

Bob's ur best bet there Spen as thicko here didnt cop choke. My spares and donor bike are all sr41 where the choke is a knob on the carb rather than a cable set up, sorry man.
User avatar
H_Lime
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 1475
Joined: Thu Dec 09, 2010 12:37 am

Re: Choke cable holder

Postby spendango » Sun Jul 28, 2019 2:16 pm

NO worries I think i'll make a bracket
User avatar
spendango
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 3101
Joined: Sat Jul 10, 2010 6:54 pm

Re: Choke cable holder

Postby spendango » Sun Jul 28, 2019 2:19 pm

BigBob wrote:Had a look in Bobs box of old Big cables and found these.
The two big ones are off a 43 but I`m sure the other one came off a 42.
You could use the 43 widget if you drilled and tapped a 6mm thread in the front left of your top yoke

SN853793.JPG



SN853794.JPG


Yes Bob i have two of the Yoke type but i think your bottom one in the pic will do the job for me the L shaped bracket that bolts onto the side of the top yoke if you could post it i would be very happy :wave: :wave: :wave: :wave:












User avatar
spendango
Site Supporter & all round Good Egg!
Site Supporter & all round Good Egg!
 
Posts: 3101
Joined: Sat Jul 10, 2010 6:54 pm


Return to Wanted

Who is online

Users browsing this forum: H_Lime and 1 guest

x