Mikuni needle specs

Questions regarding the DR750

Mikuni needle specs

Postby ian » Sun Apr 30, 2017 9:54 am

I've just discovered I have one carb with a needle washer that is 2.5mm thick and the other carb has a washer that is 3mm thick. This is the washer that goes under the clip so will influence the height of the needle in the emulsion tube. The needle is the standard 5E53. Anyone know which thickness is correct? 1988 DR750.

Thanks
Ian
You do not have the required permissions to view the files attached to this post.
ian
Regular
Regular
 
Posts: 71
Joined: Wed Jul 10, 2013 1:48 pm

Re: Mikuni needle specs

Postby BigBob » Sun Apr 30, 2017 10:28 am

Just measured a couple of my spare ones and they are 2.5mm.
They used the same one on all models from 88-97. Same one as 1990s DR125.
Part no 13382-42A00. £4.98 each from those thieving swine at Suzuki.
User avatar
BigBob
Admin
Admin
 
Posts: 3606
Joined: Sat Jan 23, 2010 10:46 pm
Location: ESSEX

Re: Mikuni needle specs

Postby ian » Sun Apr 30, 2017 12:49 pm

Thanks very much!
ian
Regular
Regular
 
Posts: 71
Joined: Wed Jul 10, 2013 1:48 pm


Return to DR750

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x