Welcome and fork question

Questions regarding the DR800

Welcome and fork question

Postby Geordiemick » Sat May 05, 2018 2:05 pm

Hi guy I’ve just purchased my first dr big 800 it’s definitely a project , but I’ve just stripped forks to do seals and when I’ve got them apart one leg hasn’t got a bottom bump stop and the other lower hasn’t got the bottom spring is this correct ?
Geordiemick
Virgin - be gentle
Virgin - be gentle
 
Posts: 2
Joined: Sat May 05, 2018 1:55 pm

Re: Welcome and fork question

Postby BigBob » Sat May 05, 2018 9:20 pm

Sounds like you bought your Big off a nutrounding goon if those are missing.
Go here for parts and manual http://www.timguy.net/sites/drbiginfo/DrBIGmanuals/ and remember......... read twice fix once.
Good luck :tup:
User avatar
BigBob
Admin
Admin
 
Posts: 3593
Joined: Sat Jan 23, 2010 10:46 pm
Location: ESSEX

Re: Welcome and fork question

Postby Geordiemick » Sun May 06, 2018 6:49 am

Cheers bob, I found a parts fiche from Holland and ordered the parts yesterday , yes indeed lots of goonery going on here. Bought it in bits , just about every bearing and seal is shot , I’m gonna be seeing a great deal of this forum :lolno:
Geordiemick
Virgin - be gentle
Virgin - be gentle
 
Posts: 2
Joined: Sat May 05, 2018 1:55 pm

Re: Welcome and fork question

Postby BigBob » Sun May 06, 2018 8:29 am

Order your parts from Robinsons 01227 454366 as they have lots of parts in stock
Ask for Michelle and mention my name for 10% off
User avatar
BigBob
Admin
Admin
 
Posts: 3593
Joined: Sat Jan 23, 2010 10:46 pm
Location: ESSEX


Return to DR800

Who is online

Users browsing this forum: No registered users and 1 guest

x