DR800 engine wanted for race bike - Any condition

[Clottyboo]

Hi

Am hoping somebody on this forum can help.

I own a Supermono race bike that is powered by a DR800 engine with a special frame by MHD. (1994)

The tuned engine has been rebuilt (Omega piston/cams/twin downdraught FCR Keihin flatslides - Just shy of 80BHP at the rear wheel!!!!) and I am hoping to race it here in the UK next year. However, with such a highly tuned engine, I suspect it is inevitable that I will be needing some parts or even a complete spare engine

So,is there anybody out there with a complete DR800 engine available for purchase? (No electrics/carbs required). Doesn't have to be a runner and even a seized engine may be useful to me.

Anyway - Please let me know if you have anything that fits the bill!!

07505 112870

[spendango]

BOB has them all stashed away

[nug]

Very nice machine

I have a few 750 motors. Not much help to you if you needed a crank though as that is obviously shorter stroke but nearly everything else is the same.

[Mr.Z]

There's a dutch super motard racer selling some engine's and other stuff.

[O.R.]

So,is there anybody out there with a complete DR800 engine available for purchase? (No electrics/carbs required). Doesn't have to be a runner and even a seized engine may be useful to me.

Anyway - Please let me know if you have anything that fits the bill!!

Have 4 sale a complete SR43 rebuilt engine

WP_20150816_15_22_54_Pro 1.jpg

and a bare under blok SR43

IMG_20171210_112254.jpg

and several engine parts in the marketplace.

Looks like a awesome bike. I've tuned my BIG myself and have built several 36mm CV carbs. I think I've added some horses. But 80 horses @ rear wheels is scared
If I may give you one advice: change your starter for the SR43 setup. SR41/42 starter gears sometimes break in stock BIG's. The SR43 starter has starter gears with a torque limiter! And the starter motor has a longer "nose" which rotates in a bearing in the engine cover.

[Pjgoose]

I have an engine complete, with carbs and electronics from an sr43 if you are still looking?

[Clottyboo]

Hi

Tried to contact you by pm but the system does not seem to recognise you.

Please give me a call on 07505 112870

Thanks

Keith